Operating instructions

EXP5000 System Overview
Entegra EXP5000 PFD -16- 600-00142-000 Rev 01
2) Bearing (Secondary Navigation)—Controls the source for the
Bearing Pointer and adjacent data block. In a dual GPS/VHF
navigator system, the available sources are: GPS 1, VLOC 1,
GPS 2, VLOC 2, ADF (if available), OFF.
3) Aux (Auxiliary Navigation)—Controls the source of the
adjacent data block only. In a dual GPS/VHF navigator system,
the available sources are: GPS 1, VLOC 1, GPS 2, VLOC 2, ADF
(if available), OFF.
4) HSI Moving Map Range and View Button (Range/View)—
When selected, Range/View allows the left knob to control the
HSI’s moving map range and view:
■ Pushing the knob—Cycles the HSI through the HSI views
(360° with map; 360° without map, 120° with map; 120°
without map).
■ Rotating the knob—Changes the HSI moving map range
when the map is available.
For more information about the HSI Map, see Setting Up the
HSI, on page 27.
Note: For SRV aircraft, the HSI moving map is not available; this button
always displays as View, which allows you to toggle between the 360° and
120° views.