Installation manual

Installation Manual
Traffic Sensor Setup P/N 600-00175-000 Rev 04
- 40 -
5.7 Traffic Sensor Setup
The EX500/EX600 allows you to acquire traffic information from many different sources. If the aircraft
has one of the sensor types shown in Table 17, the MFD will provide traffic alerting, as described in the
EX500/EX600 MFD Pilot Guide.
5.7.1 Setting up the Traffic Sensor
➤ To set up a Traffic Sensor:
1. From the Maintenance Mode Page, select Traffic Setup. The Traffic Setup Page displays.
2. Set the options for the installed traffic sensor:
3. The Traffic Setup Page options for the selected sensor displays:
!
The EX500/EX600 only supports the types of traffic sensors shown in Table 17. If you
connect a traffic sensor that is not on this list, some data may display, but the traffic
sensor control functions and accuracy may be incorrect or inoperable. Display of traffic
sensor data is not a guarantee of correct traffic sensor installation and configuration.
Table 17: Traffic System Configuration Options
Sensor Options Values
RS232 Devices Port RS232 1 to 4
Model
■ TAS600 Series
■ TCAD 9900BX
■ TCAD 9900B
TCAD Shields (TCAD 9900B only)
Range Height
Min Max Min Max
■ Terminal 0.5 1.5 200 1000
■ Standard 1.0 3.0 500 1500
■ Enroute 2.0 6.0 1000 2000
TAS Port ARINC 429 1 to 4
TAS Type
■ TAS600 Series
■ TCAD 9900BX
■ SkyWatch
■ Bendix/King
External Controller? (Skywatch only) Checkbox
TIS-G Port ARINC 429 1 to 4
TCAS Port ARINC 429 1 to 4
Maximum Intruders
■ Display All (31)
■ Specified by Sensor
■ Minimum (8)
Sensor Range 0 – 128 NM
External Mode Control (ABV/BLW/
NRM)
Checkbox
External Range Control Checkbox