User Manual

Eleven Rack User Guide24
None No parameter will be affected when the
pedal is moved.
METER
Turn the lit Control knob to choose which sig-
nal the meter shows. You can meter various
points within the Rig, or the input or output
level of any of the analog, digital, or USB
(Pro Tools) I/Os on Eleven Rack. This function is
useful for troubleshooting purposes (such as
finding clipping in the signal chain, or identify-
ing a bad guitar cable).
Signal Routing
The position of many of the devices in the signal
chain can be changed. The order that devices are
plugged into each other can make a large differ-
ence in the sound you get.
Most effects can be moved anywhere before or
after the amp and cabinet models. The FX Loop
can be moved to one of four places:
• The beginning of the chain
• Immediately before the amp and cab
• Immediately after the amp and cab
• Immediately before the final output
To move an effect:
1 Turn the Scroll wheel to select the effect you
want to move.
1 Press SW2 to enter Move mode.
2 Turn the Scroll wheel to move the effect to a
different position in the signal chain.
3 Press SW2 again to keep the change, or SW1 to
cancel the move.
Rig Edit Mode
When there are additional controls available for
the device or utility setting you’ve selected,
pressing SW1 (labeled CONTROLS) takes you to a
special editing screen for that device, called Rig
Edit Mode.
The Control knobs that are assigned to controls
in the current device will light amber, if you’re
editing Amp, Cab, or FX Loop settings, or green,
if you’re editing an effect. The display shows
what parameter each knob is assigned to, and
the current setting of each parameter.
When you turn a knob away from its saved set-
ting, it will light red, to show you that the set-
ting has changed. If you want to return a control
to its saved setting, turn the knob until it goes
back to amber or green.
SW1 and SW2 are assigned to various functions,
(such as BYPASS), which toggles the current ele-
ment on and off, and other switched behaviors,
such as BRIGHT (bright switch).
For information on toggling Eleven Rack
between expression pedal and footswitch
control, see “External Pedals” on page 92.
Control page for Green JRC OD effect
Individual effects may be toggled on and off
at any time by pressing the corresponding
Effects Control button on the front panel of
Eleven Rack. The Wah effect can be toggled
on and off by pressing FX1 and FX2 simul-
taneously.