User Manual

Chapter 3: Exploring Rigs 21
Rig View
Rig View lets you access every aspect of the cur-
rent Rig, from the amp, cabinet, and micro-
phone type, all the way to choosing effects, and
changing their order in the signal chain.
You can switch to Rig View from Rig Select View
by pressing the Edit/Back button on the front
panel of Eleven Rack.
Once you’ve entered Rig View, you’ll see a selec-
tion of icons, each representing a different de-
vice or utility setting within the current Rig.
Turn the Scroll wheel to select the element you
want to access.
As you scroll through the list, certain functions
will be assigned to the lit Control Knobs, (such
as choosing the type of amp or effect you want
to use).
When you’re finished editing, press the
Edit/Back button again to get back to the main
Rig Select mode.
Page Indicator
In Eleven Rack’s editing screens, a Page indica-
tor appears on the display if there is more than
one page of controls. The Page indicator shows
the number of pages, as well as the name of the
page you’re viewing. Turn the Scroll wheel to
switch between pages.
Signal Chain Devices and
Utility Settings in Rig View
This section describes the functions of the signal
chain devices and utility settings pages found in
Rig View.
If the device or setting you select in Rig View has
additional controls, pressing SW1 (labeled
CONTROLS) takes you to a special page of addi-
tional controls for that device. When you’re fin-
ished, press Edit/Back to go back to Rig View.
Input
Turn the lit Control knob to manipulate the
True-Z impedance circuitry in Eleven Rack.
When set to Auto, the input impedance is deter-
mined by the first active effect or amp in the sig-
nal chain. You can also choose a specific load
value to best match your pickups.
Rig View
If you make changes you want to save, be
sure to use the Save button before switching
to a different Rig. For details, see “Saving
Your Work” on page 25.
Page indicator, showing page two of four
For more details on accessing additional
controls, see “Rig Edit Mode” on page 24.