User Manual

Eleven Rack User Guide18
Rig Select Mode
When you turn on Eleven Rack, it’s already in
Rig Select mode. In this mode, you can turn the
Scroll wheel to find and select a Rig.
Rig Select Display Modes
The Rig Select page can be viewed four different
ways. To cycle through the display modes, press
the SW1 button.
Default Mode
This mode shows the Rig number and name,
and provides a set of amp or effects controls that
you can change without entering Rig View.
Simple Mode
This mode shows the Rig number and name in
the largest typeface possible. It’s perfect for see-
ing from across a dark stage.
Details Mode
This mode lists the amp, cabinet, and effects
models that are used in the current Rig, plus
their on/off status.
Outputs Mode
This mode offers fast access to the output set-
tings for the current Rig. It provides four lit con-
trol knobs. These are labeled TO AMP 1 (Output
To Amp 1 volume), TO AMP 2 (Output To Amp 2
volume), AMP OUT (amp output volume), and
RIG VOL (Rig output volume).
For more information about Rig View, see
“Rig View” on page 21.