User's Manual
Table Of Contents
- Contents
- Introduction
- Installation and Setup
- Pro Tools | Carbon Front Panel Operation
- Pro Tools | Carbon Back Panel Connections
- Configuring Pro Tools
- DSP Mode for Low-Latency Monitoring
- Appendix A: Specifications
- Appendix B: Pro Tools | Carbon Core Audio Devices
- Appendix C: Pro Tools | Carbon Pin Out Diagrams
- Appendix D: Network Port Usage
43
4 In the resulting AVB Audio Entity Configuration window, select Pro Tools | Carbon.
5 From the Current Configuration selector, select the configuration that best suits your workflow:
• 28x56 (44.1–96 kHz)
• 56x56 (44.1–96 kHz)
• 56x84 (44.1–96 kHz)
• 28x42 (44.1-192 kHz)
• 28x56 / 14x14 (44.1-192 kHz)
• 42x56 / 14x14 (44.1-192 kHz)
6 Quit the AVB Audio Configuration application (AVB Audio Configuration > Quit, or press Command+Q).
If the AVB Audio Entity Configuration window does not appear automatically, choose Window > Audio Entity Configuration
(or press Command+1).
AVB Audio Entity Configuration window
In Pro Tools, the System Usage window shows the number of available Input Channels and Output Channels for the selected
configuration, and how many are currently in use by the open session. See System Usage.