User's Manual
Table Of Contents
- Contents
- Introduction
- Installation and Setup
- Pro Tools | Carbon Front Panel Operation
- Pro Tools | Carbon Back Panel Connections
- Configuring Pro Tools
- DSP Mode for Low-Latency Monitoring
- Appendix A: Specifications
- Appendix B: Pro Tools | Carbon Core Audio Devices
- Appendix C: Pro Tools | Carbon Pin Out Diagrams
- Appendix D: Network Port Usage
40
Appendix B: Pro Tools | Carbon Core Audio Devices
Pro Tools | Carbon presents two separate AVB Audio Devices in the Audio Devices list in AMS: Pro Tools | Carbon: I/O and
Pro Tools | Carbon: Reserved for Pro Tools. Note that when setting the Clock Source, default Sample Rate, or AVB Configuration
for Pro Tools Carbon, any changes you make to one device affects the other.
Pro Tools | Carbon: I/O
When using Pro Tools | Carbon with third-party Core Audio applications or for macOS system audio, the Pro Tools | Carbon: I/O
device must be used. The available AVB input and output channels are determined by the selected AVB Device Configuration
(see AVB Device Configuration).
To use Pro Tools | Carbon for Mac System Sound Input and Output, select the “Pro Tools | Carbon: I/O” device in the Output
and the Input pages of the Sound System Preferences.
Pro Tools | Carbon: I/O device selected in AMS