User Manual

Pro Tools Reference Guide690
The equivalent offset in milliseconds is dis-
played in the msec Offset column. This value
cannot be edited, but updates when a new value
is entered in the Sample Offset column.
3 Press Enter (Windows) or Return (Mac) to ac-
cept the entered offset value.
To reset all offsets for all MIDI and Instrument
tracks, click the Reset button in the upper left of
the window.
Stuck Notes
If you encounter stuck notes with any of your
MIDI devices, you can silence them with the All
MIDI Notes Off command.
To turn off all stuck notes:
 Choose Event > All MIDI Notes Off.
Remove Duplicate Notes
The Remove Duplicate Notes command is used to
remove duplicate MIDI notes. If a note starts
within the first 25% of the duration of a note of
the same pitch which is already sounding (or
within an eighth-note, whichever is shorter), it
is considered a duplicate and is combined with
the previous note. If it starts later than that, the
first note is shortened so that it ends at the same
tick at which the new one starts.
To remove duplicate notes:
1 Make an Edit selection including the duplicate
notes you want to remove.
2 Choose Event > Remove Duplicate Notes.
MIDI Real-Time Properties
MIDI Real-Time Properties let you change some
MIDI properties of MIDI and Instrument tracks
(or MIDI regions) during playback. There are
five types of MIDI Real-Time Properties: Quan-
tize, Duration, Delay, Velocity, and Transpose.
MIDI Real-Time Properties can be adjusted dur-
ing playback, so you can listen to the results.
Once you have found the settings you want, you
can write the settings to the selected tracks or re-
gions. This overwrites the corresponding MIDI
properties on selected tracks or regions and re-
sets the Real-Time Properties display to its de-
fault settings.
Real-Time Properties can be adjusted in the Real-
Time Properties view in the Edit window, or in
the Real-Time Properties window.
Press Control+Shift+Period (.) (Windows)
or Command+Shift+Period (.) (Mac) for the
All MIDI Notes Off command.
For MIDI Real-Time Properties to apply to
incoming MIDI data with MIDI Thru
enabled, the corresponding MIDI and
Instrument tracks must be record-enabled.