User Manual

Pro Tools Reference Guide898
For example, if an event was played at Bar
1|1|060 (a 16th note), and the corresponding
template event is at 1|1|073, a slider value of
100% results in the event being shifted to
1|1|073 (a slider value of 200% shifts the note to
1|1|086).
The default value for the Timing slider is 100%.
Duration Enable to influence the durations of
the selected MIDI notes. The Duration option
does not apply to audio selections. At a setting
of 100%, durations are changed to match the
current groove template. Set to 200%, durations
increase and decrease based on the ratio of the
original duration of the selected notes and the
durations in the template.
The default value for the Duration slider is
100%.
Velocity Enable to influence the velocities of the
selected MIDI notes. The Velocity option does
not apply to audio selections. If the slider is set
to 0% there is no change to the selected veloci-
ties, a setting of 100% sets all velocities to match
the current groove template. A velocity setting
of 200% typically results in over-exaggerated ve-
locities—loud notes increasing and soft notes
decreasing in volume.
For example, if two adjacent notes have equal
velocities of 80, and the two corresponding tem-
plate velocities are 70 and 90, setting the slider
to 200% changes the velocities to 60 and 100.
The default value for the Velocity slider is 100%.
Recalling Options Slider Settings
To Save the groove template with the current
Options Slider Settings:
1 In the Quantize window, select Recall with
Template if you want to restore all Groove Quan-
tize Options to the settings that are saved with
the current template
2 Click the Save button.
3 Enter or edit any comments you want to save
with the template.
4 Do one of the following:
• Click the Save button to save the groove
template with the current Options Slider
Settings.
– or –
• Click the Save As button to make a copy of
the groove template with the current Op-
tions Slider Settings. In the resulting Save
dialog, enter a name for the copy and click
Save.
Slider settings can be lost if any of the following
operations are performed without saving the
settings first:
• Another Event Operations window is se-
lected.
• The Event Operations window is closed.
• You switch to another groove template.
Beat Detective does not extract duration in-
formation from audio performances.
DigiGroove templates created using Beat
Detective contain a fixed duration value that
is 50% of the selected template resolution
(see “Defining a Beat Detective Selection” on
page 638).