User Manual

Chapter 29: Fades and Crossfades 601
Preset Curves Seven commonly used preset
curves are provided for fast crossfade creation.
These can be edited by dragging the end points
of the curve in the curve editor portion of this
dialog. The seven presets are as follows:
 Preset Curve 1 stays at full volume throughout
the fade, then immediately drops the volume at
the end of the fade.
 Preset Curve 2 fades out relatively slowly,
keeping the volume fairly high throughout the
duration of the fade.
 Preset Curve 3 fades out slightly faster, keep-
ing the volume slightly lower during the fade.
 Preset Curve 4 fades out with a linear fade.
This is the default curve.
 Preset Curve 5 fades out quickly at the begin-
ning of the crossfade.
 Preset Curve 6 drops the volume even more
quickly at the beginning of the fade.
 Preset Curve 7 silences any audio at the begin-
ning of the fade.
Link Settings
(Crossfades Only)
The Link setting links the selected fade-out and
fade-in curves of a crossfade. If you adjust one
curve, the corresponding curve is also adjusted.
This ensures that the resulting crossfade is an
equal power or equal gain crossfade, depending
on which one you select.
Preset Curve 1
Preset Curve 2
Preset Curve 3
Preset Curve 4
Preset Curve 5
Preset Curve 6
Preset Curve 7
Fade Link