User Manual

Chapter 44: Plug-In and Hardware Inserts 991
Control Surface Mapping
When you create a custom plug-in map, its pa-
rameters are arranged in pages that correspond
to the controls on the control surface. The size
of a page depends on the type of control surface.
Each custom plug-in map allows up to 200 pages
of mapped parameters.
Plug-In mapping is stored according to the fol-
lowing types of control surfaces:
8-Fader Surfaces The following have a page size
of 8 mappable encoders/switches:
• 003
• Digi 002
• Command|8
• M-Audio Axiom Pro
24-Fader Surfaces The following have a page
size of 24 mappable encoders/switches:
•C|24
• Control|24
ICON Surfaces The following have a separately
mappable encoders and switches with the fol-
lowing page sizes:
• D-Control
®
• Custom Faders display 6 rows (pages) of
8 encoders and switches at a time
• Channel strips display 1 column (page) of 6
encoders and switches at a time
• D-Command
• Custom Faders display 2 rows (pages) of
8 encoders and switches at a time
• Channel strips display 1 column (page) of 6
encoders and switches, 2 at a time
Plug-In Mapping is not supported with
ProControl.
If you import a plug-in map that was cre-
ated on a different type of control surface, it
will appear as an inactive choice in the Map
Presets menu.