Specifications

Chapter 3: Using XMON 13
Dim Level
Dim can be engaged from S6, and Dim level can be set directly from the S6 Touchscreen.
To engage Dim:
 Press the Dim switch below the Control Room knob.
To set the Dim level:
 Adjust the Touchscreen knob assigned to Dim, or adjust the Dim level in the Misc tab of XMON EUCON Software.
Speaker Management
Speaker Mapping
The Speakers buttons at the bottom of the Control Room Setup screen (shown in Figure 14) correspond to the eight outputs for the
currently selected Control Room feed: Main, Alt, Mini.
Speakers On and Off
The Speakers outputs are toggled on and off by clicking the eight buttons on the Control Room Setup screen.
• A lit button indicates the speaker output is on.
• An unlit button indicates the speaker is off.
Additional Information
The following XMON features are currently not supported in the XMON EUCON Software Application:
• Linking Monitor Output levels
• Broadcast Mode for AFL and PFL monitoring
• Auto Talkback Mode
When Alt 2 Spkrs is selected on the S6, the Control Room Setup screen speaker selector array shows only the two speakers for the
Mini output feed.
Figure 14. Two Control Room speakers enabled (on)