Specifications

Chapter 3: Using XMON 12
Monitor A–D Sources
The following input sources are available for Monitor A–D:
• Control Room L/R
• Talk (Talkback)
• Cue 1 (Monitor A, B, and C)
• Cue 2 (Monitor A, B, and D)
• Cue 3 (Monitor A, B, and E)
Setting Control Room, Monitor, and Dim Levels
You can adjust Control Room, Monitor, and Dim levels from the S6 Monitoring section.
Control Room Levels
The Control Room knob in the Master Module Monitoring section adjusts the level of the three Control Room output feeds inde-
pendently.
To adjust the level of the Main Spkrs (7.1), Alt 1 Spkrs (7.1), or Alt 2 Spkrs (Stereo):
1 Select Main Spkrs, Alt 1 Spkrs, or Alt 2 Spkrs by pressing the corresponding switch next to the Control Room knob.
2 Adjust the Control Room knob to the desired playback level for the selected speaker feed.
3 To cut (mute) the selected Speaker feed, press the Control Room knob, or press the Mute switch below it.
Monitor Levels
To adjust Monitor levels from S6:
1 Do any of the following:
• To adjust Monitor A or B levels using the Monitor knob, press
Mon A or Mon B next to the Monitor level knob, then rotate
the Monitor knob to adjust the level. to cut (mute) the selected Monitor feed, press the Monitor knob.
• To adjust Monitor A–D from the Touchscreen knobs, rotate the corresponding knob. Press the knob to cut (mute) the feed.
2 To cut (mute) the selected Monitor feed, press the Monitor knob.
3 For Monitor E, you must toggle the “D” control to “E” in the XMON EUCON Software. See “Monitor D and E” on page 9.
Access to Monitor E can only be selected in XMON EUCON software as described in “Monitor D and E” on page 9.
Figure 13. Control Room knob
Setup
Setup
Setup
Alt 1
Spkrs
Mon
Insert
Alt 2
Spkrs
Main
Spkrs
Dim Cut
Talk
Coms
Mon B
Mon A
0.00
CR L/R In