Specifications

Chapter 3: Using XMON 11
You can re-order Sources in the upper row so that they appear in different Source boxes.
To re-order sources in the Source row:
1 Tap the Source name shown in the upper row. A yellow outline surrounds the name, and the Source Select list appears in the cen-
ter of the Touchscreen with the current assignment highlighted.
2 Tap in the Source Select list to select a different Source to occupy the currently selected Source box.
Monitors A–D
To select input sources for the four Monitor feeds:
1 Navigate the Touchscreen to the Monitoring screen.
2 Select a Monitor bus to configure by tapping its green box (A, B, C, or D). The center of the Touchscreen displays the Monitor
Select
list for the current Monitor feed
3 Touch a source in the list to activate it for the currently selected Monitor feed.
Active sources are lit blue, inactive sources are gray. In Figure 12, CR L/R In and Talk are active for Monitor A.
Figure 11. Selecting a Source to re-order
Figure 12. Choosing Monitor A sources on S6