Specifications

Chapter 3: Using XMON 10
Using XMON with S6
This section explains the following monitoring features when using XMON with S6.
• “Selecting Sources” on page 10
• “Setting Control Room, Monitor, and Dim Levels” on page 12
• “Speaker Management” on page 13
Selecting Sources
S6 lets you assign XMON input sources to the Control Room and Monitor outputs.
To select input sources for the Control Room:
1 Press the lower Setup switch in the Control Room section to display the Monitoring screen.
2 The Monitoring screen shows available sources across the top row. Blue sources are on; dimmed sources are off.
3 Tap a gray Source button to toggle the corresponding source on; tap a blue source button to toggle that Source off. In Figure 10,
Main, Surround, and Listenback sources are on.
4 To toggle all sources on/off, tap All.
Control Room Sources
The following input sources are available for the Control Room:
•Main
• Surround
• Stereo 1
• Stereo 2
• Stereo 3
• Stereo 4
• Listenback
•AFL
Figure 9. Setup (Monitoring screen) switch in the Control Room section of the S6 Master Module
Figure 10. Sources in the Monitoring screen
Setup
Setup
Talk
Coms
Mon B
Mon A
0.00
CR L/R In