Specifications

Chapter 1: Introduction 1

Chapter 1: Introduction

The Avid

EUCON

(Extended User Control) adapter enables fully integrated control of Pro Tools

from Avid Artist and Pro Series control surfaces.

•Artist Control

•Artist Mix

•Artist Transport

•MC Pro and System 5-MC

•System 5

This guide explains how to enable EUCON control in Pro Tools, and lists all Pro Tools commands

available for Soft Key assignment.

System Requirements

• Pro Tools or Pro Tools HD version 10.0 or higher, along with at least one of the following:

• Artist Control, Artist Mix, or Artist Transport and EuControl software (version 2.6.2 or higher)

• Avid MC Pro or System 5-MC with the current MC App software, and current EUCON Worksta-

tion software on the Pro Tools workstation

• Avid System 5 Digital Audio System running eMix software (version 5.0 or higher), and current

EUCON Workstation software on the Pro Tools workstation

Artist Series

For downloads and other Artist Series resources, visit www.avid.com/artistsupport

Pro Series

For downloads and other Pro Series resources, visit www.avid.com/proseriessupport

Avid can only assure compatibility and provide support for hardware and software it has tested and

approved. For complete system requirements and a list of qualified computers, operating systems,

hard drives, and third-party devices for Pro Tools, visit:

www.avid.com/compatibility

For setup and configuration instructions for EUCON on MC Pro, System 5 and other Pro Series sys-

tems, see the instructions that came with your hardware. For the must recent software updates and in-

formation about these Avid control surfaces, visit www.avid.com/proseriessupport.