Specifications

Pro Tools EUCON Guide8
Attaching a Pro Tools Workstation to System 5
To attach a Pro Tools workstation to System 5:
1 On the CM401, press MAIN Panel to show the MAIN panel.
2 Select EUCON, then Setup. All workstations recognized on the network are listed.
3 Hold down the Workstation button (below the panel), then press the Select button to the left of the
displayed name of the computer (workstation) on which Pro Tools is installed.
4 The button flashes until communication has been established.
Once the Pro Tools workstation has been attached, you can assign Pro Tools tracks to console strips
and save assignments as Layouts. For instructions on these and other operations, see the System 5
User Guide.