Specifications

Pro Tools EUCON Guide6
Enabling EUCON in Pro Tools
To enable EUCON control in Pro Tools:
1 Launch Pro Tools if it is not already running.
2 In Pro Tools, choose Setup > Peripherals, and click the Ethernet Controllers tab.
3 Click to select Enable EUCON.
4 Click OK. You do not need to configure any other Ethernet Controllers settings. These settings do
not apply to EUCON.
Pro Tools scans your system until it identifies attached EUCON-compatible controllers. When
Pro Tools finishes scanning your system, your controllers are ready to use with Pro Tools.
Using Multiple Artist Series and Other Units
Multiple Artist Series Units
Artist Series units can be combined to form larger, unified systems. For example, you can use two Art-
ist Mix units and an Artist Control simultaneously. Pro Tools will recognize all attached units auto-
matically.
Other Units
When EUCON is enabled in Pro Tools, the use of additional control surfaces is subject to the following
conditions:
 You can use the Surround Panner Options, as well as one USB/MIDI-based control surface at the
same time as EUCON. A MIDI control surface will mirror the first eight channels on EUCON devices.
 You cannot use another Ethernet-based work surface (such as an MC Pro, ICON worksurface, or C|24
control surface) at the same time as EUCON.
Enable EUCON
Use your EuControl software to arrange the layout of multiple units. For more information, see the
EUCON Application Setup.pdf.