Specifications

Chapter 2: Installing XMON 4
Chapter 2: Installing XMON
This chapter includes the following:
• Making audio connections
• Installing the USB-to-MIDI Adapter
• Connecting the Control Cable Breakout Adapter
• Connecting a Talkback microphone
• Installing and configuring the XMON EUCON Software Application
Making Audio Connections
Monitoring is based on the XMON analog interface, which is remotely controlled from the XMON EUCON Software Application
and the Avid S6 or MC Pro Control Room section. All supported audio inputs and outputs for control room monitoring and studio
communication are connected to the XMON interface.
All audio connections are made with standard DB-25 connectors. See Appendix A, “DB-25 Connectors” for wiring convention and
pinout tables.
Figure 3. XMON audio connections
Not all connections are supported with other Avid control surfaces.
XMON provides 18V phantom power for the Talkback 2 Mic that connects via the DB-25 connector. The Talkback 1 mic, which
is carried on the 15-pin Control Cable, requires an external phantom power supply.