Specifications

Chapter 3: Using XMON 10
Selecting Sources from MC Pro
The MC Pro surface lets you assign XMON input sources to the Control Room and Monitor outputs.
Control Room
To select input sources for the Control Room:
1 Press the SETUP key in the Control Room section of the MC Pro surface. The Touchscreen that appears displays the available
sources across the top row in blue.
2 Press a gray button directly below a source to toggle the corresponding source on.
3 Press a yellow button directly below a source to toggle the corresponding source off. In the figure above, only the Main source
is active. The yellow
On button (below the surface graphic) is only active when at least one source is active. This button toggles
all currently assigned sources off/on.
4 You can re-order the blue sources by clicking on one and re-selecting another source.
For Avid S6, see the S6 Guide (included with other S6 documentation in the download available in your Avid Master Account).
Figure 6. MC Pro Control Room Setup Touchscreen
Figure 7. Re-ordering the sources
The Monitor and Control Room source selectors are always in Sum mode. Selecting a new source does not turn off the previously
selected source(s).