Specifications

Chapter 3: Using XMON 9
Chapter 3: Using XMON
XMON to EUCON Mapping
This section clarifies the terminology used for the XMON and Avid S6, MC Pro/System 5-MC hardware.
Control Room
The Control Room section of the MC Pro/System 5-MC can route input sources to three sets of outputs.
Main Spkrs Routes selected source(s) to the Main 1–8 (7.1-channel) outputs on the XMON hardware.
Alt 1 Spkrs Routes selected source(s) to the Alt 1–8 (7.1-channel) outputs on the XMON hardware.
Alt 2 Spkrs Feeds selected source(s) to the Mini 1–2 (stereo) outputs on the XMON hardware located on the TB/LB/UTIL connector
(XLR-M 6–7).
Monitors A–D
Monitor A Controls the output level of Headphones 1–2 located on the Control Cable Breakout Adapter.
Monitor B Controls the output level of STLS Output 1–2 located on the CUE OUTPUTS connector (XLR-M 1–2) on the back of
the XMON hardware.
Monitor C Controls the output level of Cue Output 1–2 located on the CUE OUTPUTS connector (XLR-M 3–4) on the back of the
XMON hardware.
Monitor D Controls the output level of Cue Output 3–4 located on the CUE OUTPUTS connector (XLR-M 5–6) on the back of the
XMON hardware.
Not all connections are supported on all Avid control surfaces. See the documentation that came with your S6 or other control
surface for more information.