Specifications

Pro Tools Menus Guide58
VENUE
This page configures Pro Tools for use with a
VENUE system.
I/O
This I/O Setup dialog provides tools to label and
map Pro Tools input, output, insert, bus signal,
and Mic Preamp (PRE) paths. The I/O Setup di-
alog also lets you configure delay compensation
for hardware inserts.
In addition, the I/O Setup dialog, like the Main
page of Hardware Setup, provides controls for
routing the physical ports on your audio inter-
face (such as HD I/O) to Pro Tools Input and
Output channels. The Output page of the
I/O Setup dialog also lets you change the default
path settings for Meter, Audition, and multi-
channel track layout (as displayed on-screen).
Machine Track Arming
Profiles
(Pro Tools HD with MachineControl Option
Only)
This dialog provides extensive control over
Pro Tools Track Arming. You can customize
arming, track naming and mapping, and save
configurations for different machines as Track
Arming Profile files. These Profiles can be im-
ported to quickly reconfigure Track Arming as
needed for future projects. You can also test
track mapping, and remap tracks if needed.
Video Sync Offset
The Video Sync Offset dialog lets you offset
video earlier or later in a session so you can ac-
curately spot audio to it.
Avid Video Offset When playing Avid video
through an Avid video peripheral, Pro Tools au-
tomatically compensates for the delay intro-
duced by the peripheral. This means you can
leave the setting at 0 frames and the output of
the Avid video peripheral will be in sync with
the audio. If you have a plasma monitor (which
may introduce an additional delay of two
frames), you can compensate for it by entering
the amount of the delay here.
Peripherals dialog, VENUE page
I/O Setup dialog, Output page