Specifications

Pro Tools Menus Guide56
Disk Allocation
If you are using multiple hard drives for record-
ing, use the Disk Allocation dialog to assign each
track in a session to a specific drive. Audio for
that track will then be recorded to the chosen
drive.
Peripherals
The Peripherals dialog provides several tabbed
pages (Synchronization, Machine Control, MIDI
Controller, Ethernet Controller, Microphone
Preamp, Satellites, VENUE) for configuring var-
ious peripheral device for use with Pro Tools
(such as SYNC HD
™
, Command|8
®
, or PRE
™
).
Synchronization
This page configures synchronization devices
(such as SYNC HD) to synchronize Pro Tools to
SMPTE Timecode or MIDI Timecode (MTC).
Machine Control
This page configures MIDI Machine Control
(MMC) and 9-pin machine control devices for
use with Pro Tools. Slaving Pro Tools to MIDI
Machine Control is supported on all Pro Tools
systems. 9-pin Machine Control (Deck Control)
and 9-Pin Remote (Deck Emulation) modes re-
quire the MachineControl
™
software option.
Disk Allocation dialog
Peripherals dialog, Synchronization page
Peripherals dialog, Machine Control page