Specifications

Chapter 4: Edit Menu 21
Coalesce Clip Gain to Volume
Automation
This command coalesces clip gain settings to
track-based volume automation. Clip gain set-
tings are cut from the clip and coalesced with
track-based volume automation at the same
timeline locations as the clip.
Write to Current and Write to All
Enabled
(Pro Tools HD and Pro Tools with
Complete Production Toolkit Only)
These commands let you write automation
states for one or more parameters to specific
session locations in a single step. This saves you
the trouble of performing multiple automation
passes for different parameters in real time, or
having to graphically draw automation state
changes on individual automation playlists.
Write to Current Parameters
This command writes the current value only to
the currently displayed automation parameter.
Write to All Enabled Parameters
This command writes the current settings for all
automation parameters enabled in the Automa-
tion Enable window.
Trim to Current and Trim to All
Enabled
(Pro Tools HD and Pro Tools with
Complete Production Toolkit Only)
These commands let you use trim values as
snapshots and apply the relative changes (or
delta values) to the selected automation. This is
similar to the
Write Automation command, except
that it writes delta values instead of absolute
values to automation data. You can use trim val-
ues in writing snapshot automation to any au-
tomatable parameter.
Trim to Current Parameter
This command trims the current value only to
the currently displayed automation parameter.
Trim to All Enabled Parameters
This command trims the current settings for all
automation parameters enabled in the Automa-
tion Enable window.
Glide to Current and Glide to All
Enabled
(Pro Tools HD and Pro Tools with
Complete Production Toolkit Only)
These commands let you manually create an au-
tomation transition (or glide) from an existing
automation value to a new one, over a selected
area.
Glide to Current Parameter
This command applies Glide Automation only to
the currently displayed automation parameter.
Glide to All Enabled Parameters
This command applies the Glide Automation for
all automation parameters enabled in the Auto-
mation Enable window.
Glide Automation can also be used for
automating the Surround Panner.