Specifications

Live Recording Guide46
MADI When using a MADI card connected to an
HD MADI interface, the HD MADI interface ap-
pears above the patching grid. The peripheral
must use the following default names before im-
porting VENUE settings:
•
A HD MADI Port 1
• AHDMADI Port 2
• B HD MADI Port 1
• B HD MADI Port 2
Other Pro Tools HD Interfaces If you are using
other Pro Tool HD audio interfaces between
your VENUE system and your computer, you
must edit the names of the interfaces as follows:
• For systems with a single Stage Rack or a
Mix Rack, double-click the box above the pe-
ripheral in I/O Setup and enter the following
depending on your configuration:
• For peripheral A, enter
Stage 1 for Stage in-
puts 1-16
• For peripheral B, enter
Stage 17 for Stage
inputs 17-32
• For peripheral C, enter
Stage 33 for Stage
inputs 33-48
• For systems with two Stage Racks, double-
click the box above the peripheral in I/O Setup
and enter
the following depending on your
configuration:
• For peripheral A, enter
Stage1 1 for Stage 1
inputs 1-16
• For peripheral B, enter
Stage1 17 for Stage
1 inputs 17-32
• For peripheral C, enter
Stage1 33 for Stage
inputs 33-48
• For peripheral D, enter
Stage2 1 for Stage 2
inputs 1-16
• For peripheral C, enter
Stage2 17 for
Stage 2 inputs 17-32
• For peripheral C, enter
Stage2 33 for
Stage 2 inputs 33-48
Using VENUE Link
See the following sections for information on
how to use VENUE Link features:
• “Importing VENUE Settings into Pro Tools”
on page 47.
•“Creating ProTools Markers from VENUE
Snapshots” on page 50.
HD MADI card in IO Setup
Naming a peripheral in I/O Setup for single Stage
Rack or Mix Rack systems
Naming a peripheral in I/O Setup for dual Stage Rack
systems
When not connected to a VENUE system,
make sure VENUE Link is disabled in
Pro Tools. Go to Peripherals > VENUE. From
the VENUE System pop-up menu, select none.