Specifications

Chapter 4: Live Recording and Playback 37
5 Do the following to create the Snapshot with
the Pro Tools inputs active:
• Create a new Snapshot and name it.
– and –
• Recall the new Snapshot by clicking the
Recall button.
6 Go to the Patchbay page and, under the Inputs
tab, click
Pro Tools.
7 Patch the Pro Tools channels you want to use
for Virtual Soundcheck to your console’s input
channels and click
Assign.
8 Go back to the Snapshots page and click Store.
9 Make changes to your mix while playing back
Pro Tools audio, including channel input gain
settings.
10 Go back to the Snapshots list and click Store
to store any changes, including the input patch,
made while the Pro Tools inputs are active.
11 You can recall the previous Snapshot to go
back to your live Stage Inputs. Changes made
while working in the Snapshot with Pro Tools in-
puts active carry over when you switch back to
the Snapshot with live Stage inputs active.
Naming the Virtual Soundcheck Snapshot
Double-check to make sure you are editing
the correct Snapshot. The most recently re-
called Snapshot is either green or yellow in
the Snapshots list.
Naming the Snapshot
Patching FWx inputs to console input channels
Channel input gain from Pro Tools will al-
ways be 3–6 db lower than your Stage inputs
input gain, depending on recording levels.
You may have to adjust the input gains for
the Pro Tools inputs to approximate the lev-
els of the live Stage inputs.