Specifications

Live Recording Guide36
3 If you do not have any Snapshots, do the fol-
lowing to create a Snapshot:
•Click
New. The new Snapshot appears in the
Snapshots list.
• Click the channels you want affected when
the Snapshot is later recalled so that they
are scoped. Scoped channels are displayed
in red.
• For each parameter of the scoped channels,
click the corresponding Data Type button
so that it is scoped. Scoped parameters are
displayed in red.
• Double-click the Snapshot name, enter a
name for the new Snapshot, and press Enter
on the keyboard.
4 Do the following to create the Snapshot with
live Stage inputs active:
• Create a new Snapshot and name it.
– and –
• In the Scope section of the Snapshots page,
click the
In and PRE Data Type buttons to
scope only the input patching and the input
gain settings for the scoped input channels.
Deselect any other scoped Data Type but-
tons. Only the IN and PRE buttons should
be displayed in red.
Use this Snapshot to restore Stage input gains
after the Virtual Soundcheck. All other changes
made to your mix carry over when switching be-
tween Snapshots.
Scoping the input channels
Data Type Scope buttons default state
Naming a Snapshot
Naming a Snapshot
Scoping the IN and PRE parameters