Specifications

Chapter 3: Configuring VENUE and Pro Tools 11
Chapter 3: Configuring VENUE and Pro Tools
After connecting VENUE and Pro Tools, you
need to configure both systems for recording
and playback.
Configuring VENUE Systems
Configuring your VENUE system for use with
Pro Tools includes the following (depending on
your VENUE hardware):
• Enabling VENUE to send a direct digital
split of Stage inputs to Pro Tools
• Enabling Virtual Soundcheck mode
•Enabling Input mode
• Enabling redundant outputs
Enabling a Digital Split
(HDx and MADI Only)
To send a digital split of your VENUE system
Stage input channels to Pro Tools, your Stage
inputs must simply be active. If necessary, en-
able them on your VENUE system.
To enable a digital split of your Stage input
channels:
1 Do one of the following to put your system into
Config Mode:
• Press the Console Config switch on the con-
sole.
– or –
• Double-click the Mode box in the bottom-
right corner of the screen.
2 Go to the Options page and click the System
tab to access the System Configuration page.
3 Click Edit.
4 For Stage 1 inputs, in the Inputs section of the
System Configuration page, beneath Inputs 1–4,
select
Stage 1 (or Stage for Mix Rack).
FWx requires no VENUE system configur-
ing. You can proceed to “Configuring
Pro Tools System Settings” on page 17.
Selecting Stage 1 inputs