Specifications

Appendix A: Slot Configurations for Avid Video Peripherals 57
Configurations for HP Z800 with Expansion Chassis
This section describes qualified and recommended slot configurations for HP Z800 systems, with the
following expansion chassis:
• Magma or Digidesign EB7 Chassis with PCIe host card, using ATTO Celerity FC-41ES PCIe host card
to 4 GB Unity MediaNetwork
• Magma PE6R4 Chassis with PCIe host card, using ATTO Celerity FC-41ES PCIe host card to 4 GB
Unity MediaNetwork
HP Z800 with Magma or Digidesign EB7 PCIe Chassis: ATTO Celerity FC-41ES PCIe
Host Card to 4 GB Unity MediaNetwork
Slot orders in the chassis run from left (closest to the power supply) to right.
Slot Card
CPU Slot 1 (PCIe x8 mechanical, x4 elec-
trical)
1394b PCI-Express HBA (w 8K buffers) required for Mojo or
Mojo-SDI — see below for specific requirements
CPU Slot 2 (PCIe x16 - graphics) NVIDIA Quadro FX 4800 or 1800
CPU Slot 3 (PCIe x8 mechanical, x4 elec-
trical)
Empty
(Slot Not Accessible when using Quadro FX 4800)
CPU Slot 4 (PCIe x16 mechanical, x8
electrical)
Empty
CPU Slot 5 (PCIe x16 mechanical, x8
electrical)
Magma EB7 Host Adapter
CPU Slot 6 (PCI 32-bit 33 Mhz) Secondary SAS Port (Embedded)
CPU Slot 7 (PCIe x16 mechanical, x8
electrical)
Shared Storage Controllers:
Atto FC-41ES - MediaNet
Intel PRO/1000 PT - ISIS
Local Storage Controllers:
ATTO UL5D
Chassis Slot 1 (closest to power supply) HD Accel Core card
Chassis Slots 2–7 Optional: HD Accel cards (6 maximum)