Specifications

Chapter 4: Avid Unity MediaNetwork Workflows for Pro Tools 33
4 Use the controls underneath the Source Mon-
itor to locate the first frame of the portion of the
clip that you want to edit into the sequence:
• To begin playing the clip, click Play (or
press the Spacebar). Click Play or press the
Spacebar again to Pause.
• To move to the beginning of the clip, click
Rewind (or press the Home key).
• To move to the end of the clip, click Fast-
Forward (or press the End key).
• To nudge by frame, click Step Forward 1
Frame or Step Backward 1 Frame (or press
the Left/Right Arrow keys).
• To scrub, click and drag the cursor beneath
the Source Monitor. (Enable the Caps Lock
to hear audio while scrubbing.)
5 Click Mark In to mark the In point (the first
frame of the selected portion of the clip) at the
current position of the cursor.
6 Using the same controls, locate the last frame
of the portion of the clip that you want to edit
into the sequence.
7 Click Mark Out to mark the Out point (the last
frame of the selected portion of the clip) at the
current position of the cursor.
8 Click the Record Monitor to select the empty
sequence, then press the Home key to move the
cursor to the beginning of the sequence.
9 Click the Overwrite or Splice-In button. The
selected portion of old sequence is edited into
the empty sequence in the Record Monitor.
10 Follow the preceding steps for exporting the
new sequence (see “Manually Exporting an AAF
Sequence from Media Composer” on page 29).
Source Monitor controls
Rewind
Fast-
Forward
Step Forward 1
Frame
Cursor
Play/
Pause
Step Backward 1
Frame
Mark
Out
Mark
In
Clear Both
Marks
Mark
Clip
You can also select the entire clip by clicking
Mark Clip.
Overwrite and Splice-In buttons
OverwriteSplice-In