Specifications
Chapter 2: Configuring a Workstation as a MediaNetwork Client 13
Fibre Channel HBA LED States
The LEDs on the Fibre Channel HBA indicate
whether or not the card is functioning correctly.
See Table 1 for the 2 Gb Fibre Channel HBA or
Table 2 for 4 GB Fibre Channel HBAs.
Table 1. ATTO FC 3300 2 Gb Fibre Channel HBA LED states
LED LED State Meaning Required Action
Green On Normal—link up No action required
Yellow On Link down Check cable connec-
tion to MEDIASwitch
and Fibre Channel
HBA. If condition per-
sists, contact Avid
customer support.
Yellow Flashing Fault Contact Avid customer
support.
Green or Yellow Off Driver not loaded Load driver. If condi-
tion persists, contact
Avid customer sup-
port.
Table 2. ATTO Celerity FC-41ES and FC-41XS 4 Gb Fibre Channel HBA LED states
LED LED State Meaning
Link Green Indicates that a supported hardware driver is loaded for the ATTO Celer-
ity card in its host system, and that another hardware device is
detected at the other end of the connected fibre cable.
2 GB Green Indicates that the HBA is running in 2Gb mode.
4 GB Amber or Green Indicates that the HBA is running in 4Gb mode.