User guide

System 5 Digital Audio Mixing System User Guide86
Aux Send Config
Aux Sends can be individually or globally set to pre- or post-fader.
To set each Aux Bus individually:
1 Press the Aux function key to display the Aux Bus knobset.
2 Press the upper-left button beside each Gain knob to toggle the pre- or post-fader status for that send (or pair for stereo).
The button lights yellow to indicate pre-fader and does not light for post-fader. All Aux busses are set to post-fader by default.
Another option is to copy/paste the desired Aux to other channels.
After setting one channel to the desired pre/post status for each Aux Send above:
1 Press and hold down the Wave key and press the  Copy key on the channel just set.
The channel dims to show it awaits selection of items to copy.
2 Press the Strip’s Aux key to select all Aux parameters (pre/post, levels, and on/off states).
3 Press and hold down the Wave key on the channel you want to paste to, and press the Paste  key.
After the first paste, the copied channel undims, but you can continue pasting to other channels.