User guide

Chapter 10: Layouts and Snapshots 115
Recall a Layout
To recall a single Layout:
1 If the RCL key is not lit, press it once so it flashes.
2 Press the location key for the desired Layout.
The Layout reconfigures the console surface and the RCL key turns off.
It can be useful to recall several Layouts consecutively to decide which to work with:
1 If the RCL key is not lit, press it twice so it illuminates but does not flash.
If the RCL key is flashing, press it once.
2 Press the location key for the desired Layout.
The Layout reconfigures the console surface and the RCL key remains illuminated for another Recall selection.
Modify a Layout
To modify a Layout:
1 Press the Mod key at the bottom of the Layout Panel so it flashes.
2 Press the Layout key to modify.
The key begins flashing and the Wave keys for Strips in this Layout illuminate.
3 Press an illuminated Wave key to exclude a Strip currently in the Layout.
4 Press an unlit Wave key to include a new Strip in the Layout.
The Wave key begins flashing.
5 Press the Layout’s key again to store changes to this Layout.
6 Press the Mod key again to exit the modification process.
Rename a Layout
To rename a Layout:
1 Press the Name key at the bottom of the Layout Panel.
The Name key begins flashing.
2 Press the Layout key to rename.
That key also flashes.
3 Use the console keyboard to rename the Layout (eight characters maximum).
4 Press Enter to exit the process.
You can also press the Layout’s key or the Name key again to store the new name and exit the renaming process.
Delete a Layout
To delete a Layout:
1 Press the Clr key at the bottom of the Layout Panel so it begins flashing.
2 Press the key corresponding to the Layout to delete.
That key’s display darkens and the name returns to the default (i.e., L #).