User guide
Table Of Contents
- Contents
- Introduction to System 5
- Master Facilities and Channel Strip
- Control, Layouts and Snapshots, and Linking
- Chapter 8: Machine Control (S5P Only)
- Chapter 9: Control Groups and Multi Format Masters
- Chapter 10: Layouts and Snapshots
- Chapter 11: Linking (S5P Only)
- Chapter 12: Dynamic Automation (S5P Only)
- Chapter 13: GPI/O Event System
- Chapter 14: CM403 Film/Post Module (S5 Only)
- Chapter 15: Hybrid Pilot and System 5 Fusion Options
- Appendix A: Compliance Information
System 5 Digital Audio Mixing System User Guide102
Transpor t Controls
The Transport section has the standard Play, Rewind, Fast Forward, Stop, and Record keys.
The Shuttle and Jog keys provide additional transport functions:
1 Press the Shuttle key so it lights.
The SpinKnob moves the transport backward or forward. The speed depends on the degree of the SpinKnob’s rotation.
2 Press the Shuttle key again to deactivate.
3 Press the Jog key so it lights.
The SpinKnob moves the transport backward or forward. The speed depends on the degree of the SpinKnob’s rotation; maxi-
mum rotation moves the transport at the Play speed. This function is helpful for setting precise edit and cue points.
4 Press the Jog key again to deactivate.
Locate Registers
The Locate controls move the transport to a precise time rather than moving continuously.
Time Displays
The Current and Locate Time Displays (top of the figure above) are an integral part of the Locate functions.
Press the Locate Reg’s key (below the Locate Time Display) to display the Locate Registers Panel in the Panel Viewer.
The Current Time Display shows the absolute time code at the current transport location.
The Locate Time Display contains the Locate Time Register value. This value can be stored to any of the registers displayed
in the Locate Registers Panel (see below).