Specifications

System 5 and Pro Tools Guide22
Multiple Send Output Path Assignments
Pro Tools sends (Auxes) can have multiple output paths assigned to them. When assigning Send out-
put from a EUCON unit, you can simply repeat the previous instructions and the new assignment will
be added to the current assignments. When reassigning Send outputs, you must first assign no output,
then assign the new output path.
To mute a send:
1 Recall the Layout containing the desired track.
2 Press the Aux function key to show all Sends assigned on that strip’s track.
3 Press the bottom switch (On key) next to the desired Send. When muted, the key is unlit; when the
send is on, the key is lit.
To toggle the send between pre- and post-fader:
1 Recall the Layout containing the desired track.
2 Press the Aux function key to show all Sends assigned on that strip’s track.
3 Press the top switch (Sel) next to the desired Send to toggle pre-/post-fader. When the switch is lit,
it indicates the send is pre-fader; when unlit, the send is post-fader (sends default to post-fader).
To adjust send pan:
1 Recall the Layout containing the desired track.
2 Press the Aux function key to show all Sends assigned on that strip’s track.
3 Press the knob top (knob switch), then rotate the knob to adjust pan.
4 To exit Aux Pan mode, press Aux again.