Specifications

Chapter 3: Track and Session Basics 15
Track Basics
This section shows how to select Pro Tools track input and output routing.
Selecting Tracks
To select a track:
1 Recall the Layout that contains the desired track.
2 Press any fader Chan Select key.
The track is selected in Pro Tools. You can use standard Pro Tools shortcuts in combination with the
fader Chan Select keys to do the following.
To select all tracks:
 Hold Option (Mac) or Alt (Windows) on your computer keyboard and press any unlit track
Chan Select key.
To deselect a track:
 Hold Command (Mac) or Start (Windows) on your computer keyboard and press a lit track
Chan Select key.
To deselect all selected tracks:
 Hold Option (Mac) or Alt (Windows) on your computer keyboard and press any lit track
Chan Select key.
To select a range of tracks:
1 Press the Chan Select key on the first track (usually, the left-most track you want to select).
2 Hold the Shift key on your computer keyboard and press the Chan Select key on the last (right-
most) track. All tracks between the two are selected.
To select non-adjacent tracks (add to a selection):
1 Press and hold the Chan Select key to select the first desired track.
2 Press Chan Select on other strips.