Specifications

System 5 and Pro Tools Guide6
7 Save the file and drag it back to the etc folder, replacing the original.
8 When you reboot, the new name will appear. This is the name you will see within System 5 when
you attach the workstation.
To rename a Windows 7 workstation:
1 Go to Start > Computer.
2 Right-click on Computer and choose Properties.
3 In the section Computer name, domain, and workgroup settings, click Change Settings.
4 Make sure the tab Computer Name is selected; if it is not, click the tab Computer Name.
5 Click Change in the section To rename this computer or change its domain or workgroup.
6 Enter a new name for the workstation into the Computer name field.
7 Click OK.
Startup Sequence
To start up System 5 and Pro Tools:
1 With all system components turned off, turn on the Ethernet switch and allow it to complete its
startup diagnostics.
2 Turn on the SC264 System Computer and all I/O units.
3 Double-click the eMix icon on the desktop.
4 Turn on all Surface Modules, the CO600 Changeover Switch (if present), and the DF66(s) or DF70.
5 Do one of the following, as appropriate:
• If system modules have been saved as default, eMix continues to boot when all modules reach
100%. If no modules appear as Unexpected, click Continue to finish booting eMix. The startup se-
quence is now complete.
• If any modules appear as Unexpected, go to “Resolving Unexpected Modules” on page 7.
On Hybrid systems’ SC264, confirm that EUCON Discovery is set to use the second LAN connection
and that it is not on the System 5 connection.