Installation guide

Chapter 4: Connecting System Components 35
MADI connections: primary DF66 SuperCore, CO660 Changeover Switch, backup DF66 SuperCore
System designers, integrators, and end users are responsible for choosing cables, terminations, and equalizations that conform to
the recommended practice. Although the maximum recommended distances over copper can be exceeded by using high performance
cables, Avid does not endorse a particular brand or method of achieving the end result.
To/From MADI
Converters*
DF66 - 1
(Main DSP)
DF66 - 1A
(Backup DSP)
CO600
DSP A
MADI
I/O
DSP B
MADI
I/O
System
MADI
I/O
MADI
I/O
MADI
I/O
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1 2 3 4
- Each Green interconnect line represents four (4) MADI
connections.
- A single CO600 can hold four (4) CO601 Changeover cards.
- Each CO601 is capable of handling 4 In, 4 Out MADI
connections from and to input/output converters. It
distributes/switches these inputs/outputs to and from each
DF66 DSP core.
- Interconnections between CO600 and DF66 are made using
Avid-supplied cabling.
- Input and output from the CO600 is provided by Euphonix-
supplied cabling, terminating to BNC "Bulkhead" panels.
- Above Configuration shows a total of 16 MADI connections in
and out of the CO600/DSP
*) Output Port 1, MADI connection #1 is reserved for the
MA703/MC524 monitoring output