Installation guide

Chapter 3: System 5 Console 21
Chapter 3: System 5 Console
The System 5 Console consists of one CM401T Master Module and other optional components that include the CM402T Ex-
panded Channel Module, the CM408T Eight Channel Module, the CM403 Film/Post Module, and the CM409HTP Track Panner
Module.
Console Component Connections
Each console component has the following connections:
Power Connector (IEC) Accepts standard IEC power cord (provided). An auto-switching supply accepts voltages in the range
100–240 VAC, 50–60 Hz.
Network Port (RJ-45) Connects to EUCON Network Switch via RJ-45 through the console Ethernet harness (provided).
Expansion Port (DB-25) Active on the CM401T only. Connects optional, external talkback system (also available through the
Events system). An optional 16-port BNC Bulkhead Panel supports access to the MADI ports of the DSP cards.
VGA Port (HD15D) For Avid internal use only.
Mouse and Keyboard Used only on the CM401T.
Serial Port Used to connect the Joysticks.
CM401T Expansion Port: DB-25 Female pinout
13
25
1
14
Pin #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Signal
LED 1 output (active low)
Switch 1 input (active high)
+5V
LED 3 output (active low)
Switch 3 input (active high)
+5V
LED 5 output (active low)
Switch 5 input (active high)
+5V
LED 7 output (active low)
Switch 7 input (active high)
+5V
+5V
+5V
LED 2 output (active low)
Switch 2 input (active high)
+5V
LED 4 output (active low)
Switch 4 input (active high)
+5V
LED 6 output (active low)
Switch 6 input (active high)
+5V
LED 8 output (active low)
Switch 8 input (active high)
Function
Talkback to Mon A (SLS)
Talkback to Mon B (Cue 1)
Talkback to Mon C (Cue 2)
Talkback to Mon D (Cue 3)
Switch
Switch 1 (pin 2)
Switch 2 (pin 16)
Switch 3 (pin 5)
Switch 4 (pin 19)
Talley
LED 1 (pin 1)
LED 2 (pin 15)
LED 3 (pin 4)
LED 4 (pin 18)