Specifications

Chapter 8: Outputs and Output Routing 93
Adjusting the Mains
Mains can be adjusted using the channels strips and the Global
Control encoders. Mains can also be controlled on-screen (see
“Adjusting On-Screen Output Controls” on page 92).
Mains Output Levels
By default, level control for the three Main busses (Left, C/Mono,
and Right) are linked. When linked, adjusting one level control
affects the levels of the other linked busses. Any or all Main bus-
ses can be unlinked for independent level control of each bus (see
“Unlinking Mains” on page 94).
Using the Channel Strips
When Mains are banked to channel strips, each Main bus appears
on its own channel strips. Level offsets can be created for any
linked Main busses from the channel strips.
To adjust Mains output levels from the channel strips:
1 Press the User bank switch. Mains Left, C/Mono, and Right
busses are banked to channel strips 14, 15, and 16 respectively.
2 Adjust any of the three faders to change the level for all three
Main busses.
3 To create a level offset between Main busses, hold the faders
for the channels you do not want to adjust, and adjust the de-
sired fader.
Using the Global Control Encoders
The Mains Global Control encoder provides a single level control
for the currently linked Main busses. You can also assign each
Main bus to its own Global Control encoder.
To adjust Mains output levels from the Global Control encoder:
1 Make sure the Global Control main menu is shown in the
Global Control displays.
2 Adjust the Mains Global Control encoder to change the level
of the currently linked Main busses. The level indicator in the
display shows the level setting for the currently linked Main
busses.
To assign each Main bus to its own Global Control encoder:
 Press the Mains Global Control encoder. Adjust any of the en-
coders to change the level for all three Main busses.
Channel displays showing Mains assigned to channel strips
Left
1
Mono
2
Right
3
Press the Back/Top Channel Control Navigation switch to re-
turn to the global Control Main menu.
Mains Global Control encoder
Main busses assigned to the Global Control encoders
In
Sel
In
Sel
Monitors Mains
In
Sel
In
Sel
Top
Config
Back
Page
Expnd
Page
Left
Master
Mono
Master
Right
Master