Specifications

S3L System Guide90
Using Built-In Comp/Lim and EQ on
Outputs
Each Mains, Aux, Group, and Matrix output channel has a
built-in Compressor/Limiter (Comp/Lim) and a 4-band paramet-
ric EQ. If the channel is a stereo channel, the processor controls
are linked and apply to both the left and right sides of the channel.
Dynamics and EQ can be controlled using the Channel encoders,
Channel Control, and on-screen.
Using Comp/Lim on Outputs
Comp/Lim can be engaged and the threshold can be adjusted
from the channel encoders. Channel Control provides compre-
hensive control of Comp/Lim parameters.
To engage and adjust the built-in Comp/Lim from the Channel
encoders:
1 Bank the output channels you wish to control.
2 Press the Comp Channel Encoder Assignment switch.
3 Press the channel encoder In switch to toggle the processor
in/out.
4 Rotate the channel encoder to adjust the threshold. An in-
put/output curve appears on-screen when adjusting dynamics
parameters.
To engage and adjust the built-in Comp/Lim from Channel
Control:
1 Select one or more output channels.
2 Make sure the main Channel Control menu is shown in the
Channel Control displays.
3 Press the Channel Control encoder under the display showing
Comp/Lim. Comp/Lim parameters are now available on the
Channel Control encoders.
4 Press the In switch in the Channel Control Navigation section
to toggle the processor in/out.
5 Adjust the Channel Control encoders for the displayed param-
eters. An input/output curve appears on-screen when adjusting
dynamics parameters.
Processor controls for the Main Left and Right busses are
always linked, while the C/Mono bus has independent pro-
cessor controls.
For more information, including a description of the
on-screen Dynamics controls and displays, see Chapter 15,
“Dynamics.”
Comp Channel Encoder Assignment switch
Comp/Lim Threshold assigned to a channel encoder
Group Channel
Dyn
Mix
Insert Pan
Aux Flip
Input EQ
Gain
HPF
Comp
Pan
Aux
Flip
Aux 8
Thrshold
8
Press the Back/Top Channel Control Navigation switch to re-
turn to the Channel Control main menu.
Controls for built-in dynamics processors in Channel Control
When transferring S3L Show files containing output chan-
nel Comp/Lim and/or EQ processing to VENUE D-Show,
Profile, Mix Rack and SC48 systems, these settings are not
transferred.
Expnd
Top
In
Back
Page
Page