Specifications

Chapter 7: Inputs and Input Routing 85
Channel Compatibility
When storing and loading Input Channel presets, remember the
following:
 Group bus assignments are not applied if the settings in the pre-
set do not match the current system Bus Configuration
 Aux send level or pan settings for individual aux pairs are not
applied if the stored stereo link/unlink state does not match the
current link/unlink state. For example, assume the stored preset
has Aux 1–2 linked, but the current system configuration has
these Auxes unlinked. When the preset is recalled Aux 1 and Aux
2 will retain their current settings (they will not be updated),
while all other Auxes are updated to the preset settings.
Transferring Input Channel Presets
Input Channel Presets are available as Built-In Presets in the
Transfer tab of the Filing page. This lets you transfer your Chan-
nel Presets to a USB storage device or other storage device for
backup and transfer to other systems.
Input Channel Presets are supported on all systems running
VENUE software 2.5 or later, including the Standalone software.
For more information, see Chapter 19, “Shows and File
Management.”