Specifications

Chapter 7: Inputs and Input Routing 81
Adjusting Input Controls On-Screen
The software screen Input section lets you adjust input parame-
ters on-screen.
To adjust input parameters on-screen:
1 Select a channel.
2 Adjust the on-screen controls as needed:
• For controls such as the fader, Gain, and Pan, click the
fader/knob and drag to adjust the parameter.
• For button controls such as 48V and Pad, click the button to
toggle its on/off state.
To reset an on-screen Input parameter to its default value, do one
of the following:
 Alt-click the control.
– or –
 Right-click the control and choose Reset.
To reset an entire channel to its default settings:
 On-screen, right-click the on-screen fader and choose
Reset Ch <n>.
Using Built-In EQ and Dynamics on
Inputs
Each Input Channel and FX Return has a built-in 4-band EQ and
two Dynamics processors: a Compressor Limiter (Comp/Lim)
and an Expander/Gate (Exp/Gate). If the channel is a stereo chan-
nel, processor controls are linked and apply to both the left and
right sides of the channel.
Using Built-In EQ on Inputs
One of two EQ types can be selected for the built-in EQ, on a
per-channel basis: a full-spectrum parametric digital EQ or an an-
alog-modeled EQ. EQ can be controlled from Channel Control or
on-screen.
To use the built-in EQ on a channel:
1 Select one or more Input Channels.
2 Make sure the Channel Control main menu is shown in the
Channel Control displays (
User, Input, EQ, Comp/Lim,
Exp/Gate, Aux 1–8, Aux 9–16, Var Groups)
.
3 Press the Channel Control encoder under the display showing
EQ. EQ controls are assigned to the Channel Control encoders.
4 Press the In switch in the Channel Control Navigation section
to toggle the EQ processor in/out.
5 Adjust the Channel Control encoders for the displayed param-
eters. An EQ response curve appears on-screen when adjusting
EQ parameters.
6 Press the Analog button on-screen to toggle between the two
EQ types.
On-screen Input controls
Resetting a channel
Resetting a channel also unassigns any hardware input as-
signed to the channel.
For more information, including a description of the
on-screen EQ controls and display, see Chapter 16, “EQ.”
Press the Back/Top Channel Control Navigation switch to re-
turn to the Channel Control main menu.
Channel Control showing the Lo Gain EQ parameter
1
Ch 1
Lo Gain