Specifications

S3L System Guide62
Snapshots
The Snapshots tab provides several snapshot preference settings
to optimize snapshot operation.
Snapshot General Preferences
The following settings are available in the Snapshots tab.
Center Last Recalled Snapshot Manages the display of the
Snapshots list so that the last recalled snapshot is always centered
vertically, letting you maintain display of adjacent snapshots in
the list.
Default Crossfade Time Defines the length of time it takes to
crossfade between fader levels when recalling snapshots. Maxi-
mum crossfade time is 99.9 seconds.
Crossfade Pan, Balance, and Width All Pan, Balance and Width
parameters follow the default snapshot crossfade time.
PRE
The options in the PRE section let you specify which parameters
are recalled with Snapshots whose scope includes Pre settings.
Click to toggle whether recalled Input snapshot data includes the
following:
• Gain, Pad, and Phase
• +48V (phantom power)
Aux Mon and Aux FX
These settings let you classify individual Aux Sends (including
linked bus pairs) as monitor sends (“Mon”) or as effects sends
(“FX”), which lets you scope each type separately from the Snap-
shots tab.
This option is for organizing Aux Sends for snapshot control
only, and does not directly affect Aux bus operation.
MTC (MIDI Time Code)
The MIDI Time Code options let you control MTC operational
modes, frame rate, and Start Time.
Modes Available MTC modes are MTC Off, MTC Read (slave),
and MTC Generate (master).
Frame Rate This option sets the frame rate that is used when gen-
erating MTC.
Start Time This option sets the start time that is used when gener-
ating MTC.
MIDI
These settings designate the MIDI channel on which Snapshots
send or receive MIDI Bank Select and Program Change informa-
tion.
Snapshots Send on Channel This option sets snapshots to send
Bank Select and Program Change commands on a selected MIDI
channel. This provides a quick and easy way to send a MIDI com-
mand every time a snapshot is fired, without having to embed a
MIDI program change within each snapshot.
Snapshot Send on Channel does not need to be turned on in order
to send other types of MIDI data that are embedded in snapshots,
such as note on/off or MMC.
Snapshots Respond to Channel This option sets snapshots to re-
spond to incoming Bank Select and Program Change commands
on the selected MIDI channel.
For more information on using snapshots, see Chapter 20,
“Snapshots.”
Snapshots tab of the Options page
Delay is stored as a unique (discrete) data type for each chan-
nel.
See Chapter 22, “Synchronization.”