Specifications

S3L System Guide54
Assigning Functions to Channel
Control
See the following sections for information on assigning and ad-
justing processing functions using Channel Control:
Input Parameters See “Adjusting Input Parameters” on page 77.
EQ See “Adjusting EQ” on page 153.
Comp/Lim See “Adjusting the Built-In Comp/Lim” on page 144.
Exp/Gate See “Adjusting the Built-In Exp/Gate” on page 145.
EQ, Comp/Lim, and Exp/Gate Plug-Ins You can toggle between
controlling built-in processing or a like (equivalent) plug-in in-
serted on the channel. See “Adjusting Inserted Dynamics and EQ
Plug-Ins” on page 173.
Aux and Variable Group Sends See “Adjusting Sends Using
Channel Control” on page 109.
User Assignment
You can mix and match parameters from different function types
and save it as a single Channel Control
User assignment. The
User assignment is stored with each Show file.
Creating a User Assignment
Custom User assignments are made on-screen, either individually
or in User Assignment mode.
To create a custom User assignment:
1 Right-click any available encoder.
2 Select a Channel Control encoder (1-16) from the Channel
Control
menu.
To create a custom User assignment in User Assignment mode:
1 Right-click any available encoder.
2 Select Enter User Assignment mode from the menu.
3 Click an on-screen encoder to assign control of the parameter
to Channel Control encoder 1.
4 Assign any other desired parameters. Subsequent parameters
are assigned to consecutive Channel Control encoders.
To clear a User assignment on-screen:
1 On-screen, right-click a parameter.
2 Choose Clear <parameter name> from the Channel Control
sub-menu.
To clear all User assignments:
1 On-screen, right-click a parameter.
2 Choose Clear All Assignments.
3 Click Clear to confirm and clear all; click Cancel to cancel and
leave the User assignment unchanged.
Accessing the User Assignment
To access User assignment:
1 Select one or more channels.
2 Press the Channel Control encoder under the display showing
User. Assignments made to Channel Control encoders 9–16
are accessed on the second page of the User Channel Control
parameters.
Some input parameters can also be adjusted from the as-
signable channel encoders.
Assigning a parameter to Channel Control on-screen