Specifications

Chapter 4: Banking and Selecting Channels 45
Selecting Channels On-Screen
To select a channel on-screen
 Click anywhere in the on-screen fader strip, except on the
fader, mute, solo or safe buttons.
Selecting Outputs from Global Control
Mains, Auxes, Groups/ Variable Group, VCAs and Matrixes can
be selected from the Global Control encoders.
To select the Mains from the Global Control encoders:
1 Make sure the Global Control main menu is shown in the
Global Control displays.
2 Press the Global Control encoder Sel switch under the display
showing
Mains. Press the Sel switch again to select to select
the adjacent bus.
On-screen, the fader strip of the selected bus is highlighted blue.
To select the Aux and Groups/Variable Groups from the Global
Control encoders:
1 Make sure the Global Control main menu is shown in the
Global Control displays.
2 Press the Aux/Grp Global Control encoder. Aux outputs 1–8
are assigned to the Global Control encoders.
3 Press the encoder Sel switch under the display showing the
Aux output you want to select.
4 Do the following to access additional Aux and Group/Variable
Group outputs, depending on the current global Bus Configu-
ration setting:
• Press the
Page > Global Control Navigation switch to ac-
cess Group outputs 1–8 or Aux outputs 9–16 on the Global
Control encoders.
• Press
Page > again to access Group or Variable Group out-
puts 1–8.
To select VCAs from the Global Control encoders:
1 Make sure the Global Control main menu is shown in the
Global Control encoder displays.
2 Press the encoder under the display showing VCAs. VCAs 1–8
are assigned to the eight Global Control encoders.
3 Press the encoder Sel switch under the display showing the
VCA you want to select.
To select a Matrix Mixer for processing:
1 Make sure the Global Control menu is shown in the Global
Control displays.
2 Press the Matrixes Global Control encoder. Matrix outputs 1–8
are assigned to the Global Control encoders.
3 Press the Global Control encoder Sel switch under the display
showing the Matrix output you want to select.
Clicking on-screen to select a channel
A channel can also be selected by touching the fader and/or
soloing the channel. See “Channel Selection” on page 64.
Press the Back/Top Global Control Navigation switch to show
the Global Control main menu.
Mains Global Control encoder Sel switch
Mains Global Control encoder Sel switch
Click to select channel
In
Sel
In
Sel
Monitors Mains
In
Sel
In
Sel
Top
Config
Back
Page
Expnd
Page
Aux/Grp Global Control encoder
See “Bus Configuration Settings” on page 58 for more in-
formation on the available bus configuration options.
In
Sel
In
Sel
In
Sel
VCAsMatrixesAux/Grp
In
Sel
In
Sel
In
Sel