Specifications

S3L System Guide40
Software Screen Overview
The screen is not required in order to mix a performance, as all es-
sential mixing controls are provided on the console. However, the
screen is essential when setting up and configuring the system be-
fore a performance. For more information, see Chapter 6, “Op-
tions.”
Console and Software Screen Linking
The software screen is linked to console actions by default. You
can customize how VENUE targets channels to best match your
working style. For more information, see “Interaction” on
page 64.
Software Screen Banner Display
The screen provides a banner display in the lower left corner.
This display is provided to maintain line-of-sight mixing by
showing the currently adjusted parameter (such as fader level or
compression threshold) as you make changes to the parameter.
The banner display also provides Tool Tip text and status mes-
sages.
Tool Tips
With the mouse or trackball, place the cursor over a screen item to
see a brief explanation in the banner display.
Status Messages
The banner display alerts you to certain operating conditions such
as Multi-Select and Multi-Assign modes.
Viewing Page and Tabs
To view a page, do one of the following:
 Press the View Left or View Right ( ◄ or ► ) switch to cycle
through pages horizontally.
– or –
 Click the page name at the top of the screen.
To view a tab:
 Press the View Down ( ▼ ) switch so it is lit, then press the View
Left
or View Right ( ◄ or ► ) switch to scroll through the tabs
of the current page (if applicable).
– or –
 Click the tab name, below the page names on-screen.
Cursor (top) and tool tip in the banner display (bottom)
Banner display (left) and Mode display (right)
Clicking the page name to view a page
Clicking the tab name