Specifications

Chapter 3: S3L System Control Overview 39
Global Modifiers
The Global Modifier controls provide frequently used shortcuts
that can be applied to console actions and software screen inter-
actions.
Multi-Select (Shift)
The Multi-Select switch lets you select multiple input channels
and then apply an action to all selected channels for batch routing
and assignment. For more information see “Selecting and Target-
ing Channels” on page 44.
You can also use Multi-Select to select multiple consecutive
items in the Snapshots list, and in Media page Playlist and Li-
brary.
Default (CTRL)
The Default switch provides a quick way to reset a control to its
default setting (or “zero” the setting).
Examples of Using Default
To reset a fader to 0 dB:
1 Press and hold Default.
2 Press the channel Sel switch on the channel you want to reset.
To reset a single parameter in Channel Control:
 Hold the Default switch and press the encoder for that param-
eter in the Channel Control section.
To reset all parameters of a processing function in Channel
Control:
 Hold the Default switch and press the Channel Control Navi-
gation
In switch.
Fine (ALT)
The Fine switch lets you adjust controls (except for faders) on the
console or on-screen with maximum resolution. For example, if
by default a control adjusts a parameter in units of 1 dB, the Fine
switch allows adjustment in units of 0.1 dB.
You can also use
Fine to select multiple non-consecutive items in
the Snapshots list, and in the Media page Playlist and Library.
To adjust a control with fine resolution:
 Press and hold the Fine switch while moving a control. The
display associated with the adjusted control will show the val-
ues change at the corresponding resolution.
Momentary and Latching Modes
The Fine switch supports momentary and latching operation.
Momentary In momentary mode, the Fine switch stays in effect
for as long as you hold down that modifier switch.
Latching In latching mode, the Fine switch stays in effect until
you explicitly clear its active state.
To use the Fine switch in Momentary mode:
1 Press and hold the Fine switch.
2 Adjust a channel, parameter, or processor.
3 Release the Fine switch.
To use the Fine switch in latching mode:
1 Double-press the Fine switch. The switch LED lights.
2 Select or adjust one or more channels, parameters, or proces-
sors.
3 Press the Fine switch again to exit latching mode.
Command
This switch has no function for VENUE software.
SHIFT
Some switches have secondary functions, highlighted in gray
above the primary function (such as
< Bank/Home, where Home
is the secondary function). To access these secondary functions,
use either of the two
SHIFT switches located at the lower-left and
lower-right sides of the console surface.
SHIFT can be locked on.
To access the secondary function of a switch:
 Press and hold either SHIFT switch, then press the desired
switch.
To lock/unlock SHIFT:
 Press both SHIFT keys to simultaneously lock on SHIFT.
 Press either SHIFT key to unlock.
Global Modifier switches
To Multi-Select using only the keyboard and a mouse, press
the Shift key on the keyboard and select the items
on-screen.
To reset a parameter using only the keyboard and mouse,
Alt-click the on-screen control.
Multi Select
SHIFT
Default
CTRL
Fine
ALT
Command
To adjust a control with fine resolution using only the key-
board and mouse, Ctrl-click the on-screen control and adjust.
SHIFT switch
SHIFT