Specifications

Chapter 3: S3L System Control Overview 37
Global Control Navigation Switches
The Global Control Navigation switches let you navigate
through the available pages of Global Control parameters. A
switch for toggling system operating modes is also provided.
The following switches are provided:
Back/Top This switch returns Global Control to the Global Con-
trol main menu.
Config This switch toggles the system between its two main op-
erating modes, Config mode and Show mode. See “Enabling Con-
fig Mode” on page 17.
Page > Depending on the function currently assigned to Channel
Control, this switch assigns either the next page of a function’s
parameters (if available) or the set of parameters for the next
available function. The switch is lit when a next page is available.
< Page This switch either returns to the previous page of param-
eters (if applicable) or the set of parameters for the previous
func-
tion. The switch is lit when a previous page is available.
View Mode Switches
The View Mode switches provide navigation for the on-screen
software pages and tabs.
The following switches are provided:
View 1 This switch displays the Inputs page, and is lit when the
page is active.
View 2 This switch displays the Outputs page, and is lit when the
page is active.
View Up and Down (▲ and ▼)/ View Left and Right (◄ and ►)
These switches navigate between pages and tabs on-screen. See
“Viewing Page and Tabs” on page 40.
Application/Workstation Switch
This switch has no function for VENUE software.
Global Control Navigation switches
When Matrix sends are assigned to Global Control, press-
ing and holding SHIFT+Back/Top displays the Global
Control main menu.
Top
Config
Back
Page
Expnd
Page
View Mode switches
You can customize the View 1 and View 2 switches to dis-
play the pages of your choice. See “View Mode Switch 1
and 2 Assignments” on page 65.
View 1 View 2