Specifications

S3L System Guide34
Channel Control
Channel Control provides consistent control and display of channel processing functions such as EQ, dynamics, and Auxes for the cur-
rently selected input or output channel. Channel Control features eight encoders, each with a corresponding Select (
Sel) switch, In
switch, display, and color-coded LED. Four Channel Control Navigation switches are provided for navigating through parameters. You
can also create a custom User set of controls.
Channel Control Encoders
Channel Control features eight dual-function encoders that pro-
vide switch and rotary functions.
 When the Channel Control main menu is shown in the Chan-
nel Control displays, pressing a Channel Control encoder assigns
the parameters for the function shown in the corresponding dis-
play to the eight Channel Control encoders.
 When parameters are assigned to the encoders, rotating a
Channel Control encoder adjusts the individual parameter indi-
cated in the corresponding display (such as EQ band gain or Aux
send level).
Each Channel Control encoder has a corresponding select (
Sel)
switch and
In switch, as follows:
Sel This switch assigns a secondary parameter to the correspond-
ing Channel Control encoder, where available. For example,
when the EQ function is assigned to Channel Control, pressing
the
Sel switch next to the Channel Control encoder controlling
frequency assigns Q (frequency bandwidth) to the encoder.
In This switch toggles an individual parameter on/off, where
available. For example, when the EQ function is assigned to
Channel Control, pressing the
In switch for the Channel Control
encoder controlling EQ Lo band gain toggles that filter in/out.
The switch is lit when the parameter is enabled (in).
For more information on using Channel Control, see Chapter 5, “Channel Control.”
Channel Control showing the main Channel Control menu